Time to order the Steering Gear. First I need to work out what I need.
New Installations:
Measure cable routing path from wheel centre line to engine connection, as follows: A = Centre-line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centre-line of cable connection at centred tiller. For Cables Mounted to Transom: Add A, B & C, then subtract 6” and round up to the next foot. Order that length cable.
Measure cable routing path from wheel centre line to engine connection, as follows: A = Centre-line of wheel to gunwale (or deck, if routed downward), B = Dash to transom, C = Gunwale to centre-line of cable connection at centred tiller. For Cables Mounted to Transom: Add A, B & C, then subtract 6” and round up to the next foot. Order that length cable.
Seagull's A + B + C = 1' 6" + 9' 7" + 2' 1" = 13' 2"
Then 13'2 - 6"= 12' 8" round up to next foot = 13'
I've ordered a 13 foot kit
This will allow me to complete work on the Console and prepare to receive the Outboard Motor
No comments:
Post a Comment