Monday 16 September 2019

Slapping Paint About and Planning Windows

Ages since I posted anything on here, been busy elsewhere.....however, I have been working on the boat when I can.

Last time, I was starting to put the ornamental planking on the decks etc. I've finished that job and gave them a coat of epoxy resin followed by a covering of fibreglass cloth. I tried cutting strips of the cloth but it shreds into threads and makes a mess and so I had a bright idea and bought rolls of  three-inch fibreglass tape. I wanted the fibreglass for two reasons:

(1) to make the decks watertight.



(2) to give a less slippery walking surface



I've started to paint the wheelhouse


The next move is to work out the best materials and methods of fitting the windows. Here is some info I've researched.

Here’s a quick look at the most popular marine window materials on the market today:
  • Vinyl and Polyester Composite: An excellent composite material, vinyl and polyester composite fabrics offers the flexibility you need to curve and bend along a boat’s contours easily. Fabrics made using this composite stay tight against the frame and provide waterproof and mildew resistance. Herculite Inc. offers this composite combination in two top quality marine grade fabrics: Riviera and Regatta.
  • Clear Pressed Polished Coated Vinyl: A popular choice for everyday marine use, clear pressed polished coated vinyl can be rolled back easily, which is great for boat tops. Herculite’s Strataglass is one of the top brands on the market for this versatile material. Another reason for the popularity of this material it is available with scratch-resistant special coatings, which extend the life of the material considerably. Strataglass is one such example of a material that offers such a coating: VueShield.
  • Polycarbonate: Made from a semi-rigid clear plastic, polycarbonate windows are widely considered to be nearly unbreakable. With polycarbonate, user visibility is clearer that other clear plastics, plus it can be coated with scratch and UV resistant coatings for additional protection. Polycarbonate is an excellent choice for rugged uses. However, this textile isn’t soft like clear vinyl so it can’t be rolled up for storage. It also tends to be pricey.
  • Acrylic: Like polycarbonate, acrylic panels are semi-rigid and provide excellent visibility. Acrylic panels are very difficult to break, making them an excellent choice for rugged marine use. However, acrylic fabric windows can be scratched easier than some other options, and the panels can’t be rolled up for storage. Acrylic can also be expensive, so it’s best used sparingly.
When it comes to marine vinyl window materials, remember to consider the cost of each material and how that relates to its longevity. Some materials will last longer than others, which make their additional cost make sense over than cheaper materials that will require frequent replacement. Alternately, if you can maintain a more affordable and versatile fabric like polycarbonate or a clear polished pressed vinyl properly over time, why not choose the more cost effective solution (and get benefits like a roll up window?) How you use your boat and what your needs are will dictate which material is best for you.
One final note: remember that the gauge (a.k.a. thickness) of your windows affects how it will look, as well as its clarity and flexibility. Some marine window materials come in gauges as thick as 40 gauge and as thin as 12 gauge. Before you buy, check out this quick buying guide on marine window materials to make sure you’re getting the perfect choice for your needs.



(a) From the above, I've decided to use 6mm (0.25 inch) thick polycarbonate.  The following link allows me to size, cost, order to cut size the polycarbonate.








The rubber seal I need I found on 

https://www.sealsdirect.co.uk/shopping.asp?intDepartmentId=4#27


From the chart I chose:

(b) window rubber seal WR71 as it fits the 12mm (1/2") thick bulkhead and the 6mm (1/4") polycarbonate window.

(c) Additionally, I chose te FS34077 rubber filling strip that goes with the WR71 seal.

(d) Finally, a glazing tool GT75 with tips GT3243  appropriate to the above seals



I then uploaded a video on how to fit the rubber 

VIDEO ON FITTING RUBBER SEALS




3 comments:

  1. I am beginning to feel I could build a damn boat after following this step by step blog for so long. I do hope you have followers who are learning for their own enjoyment. Me...I am just along because I really like you and your stick-with-it-no-matter-what attitude. A very talented man.

    ReplyDelete
  2. Good to see you blogging again! Missed you! I'm not a boat builder as you know, but like Julie, I really like you!

    ReplyDelete
    Replies
    1. Hi old pal. Long time no speak - my fault, sorry. Life has been tough on my wife's health, but she is recovering rapidly now .... but its taken 18 months. Hope to get back to art in the not too distant future. Thanks for you kind comments and friendship.

      Delete