I had to make knees to reinforce the gunwales, and then fixed them in place at regular intervals, on either side.
Next came the forecastle deck and the floors.
This whole area in the transom area now gets boxed in to form a locker.
Technically the locker top is a quarterdeck, a bit too grand so we will call it a locker top.
I then cut and fitted the bulkhead that also serves as locker front
There are two lockers (under) that can be used as seats (over) and I have began to fit the longitudinal bulkheads for these.
There are two lockers (under) that can be used as seats (over) and I have began to fit the longitudinal bulkheads for these.
My next move is to complete the two lockers
No comments:
Post a Comment